|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www.fairchildsemi.com FAN7071 Landing Correction IC Features * Built in Power Amplifier (200mA ) * Low Stanby Current * Incorporating 2 Circuit Description The FAN7071 is an IC to drive a landing correction coil of CRT monitor. The circuit is suitable for low power consumption design Typical Applications * CRT Monitor 10-SIPH Block Diagram VCC 1 Bias Control-1 GND 10 CONTROL1 2 5 OUT1P 6 OUT1N 4 PGND1 Control-2 8 OUT2P 9 OUT2N 7 PGND2 CONTROL2 3 Rev. 1.0.2 (c)2002 Fairchild Semiconductor Corporation FAN7071 Pin Assignments 1 2 3 4 5 6 7 8 9 10 OUT1N PGND1 CONTROL1 CONTROL2 PGND2 OUT2N OUT1P OUT2P VCC Pin Definitions Pin Number 1 2 3 4 5 6 7 8 9 10 Pin Name VCC CONTROL1 CONTROL2 PGND1 OUT1P OUT1N PGND2 OUT2P OUT2N GND Pin Function Description Supply Voltage Control Input1 Control Input2 Output block GND Output1 Positive Output1 Negative Output block GND Output2 Positive Output2 Negative GND Absolute Maximum Ratings (Ta = 25C) Parameter Maximum Supply Voltage Power Dissipation Operating Temperature Storage Temperature Thermal Resistance Symbol VCC PD TOPR TSTG Rja Value 13.5 2 -20 ~ +75 -55 ~ +150 60 Unit V W C C C/W Remark Maximum Supply Voltage Operating Temperature Storage Temperature Thermal Resistance 2 GND FAN7071 Recommended Operating Conditions (Ta = 25C) Parameter Supply Voltage Control Input1 Voltage Control Input2 Voltage Output1 Positive Current Output1 Negative Current Output2 Positive Current Output2 Negative Current Symbol VCC VCONTROL1 VCONTROL2 IOUT1P IOUT1N IOUT2P IOUT2N IPEAK1P Peak Current IPEAK1N IPEAK2P IPEAK2N Min. 10.8 0 0 -200 -200 -200 -200 -700 -700 -700 -700 Typ. Max. 13.2 5 5 200 200 200 200 700 700 700 700 Unit V V V mA mA mA mA mA mA mA mA Electrical Characteristics (Ta = 25C, Unless otherwise specified) Parameter Circuit Current Output1 Positive Voltage Output1 Negative Voltage Output2 Positive Voltage Output2 Negative Voltage Voltage OUT1N to OUT1P Voltage OUT1N to OUT1P Voltage OUT1N to OUT1P Voltage OUT2N to OUT2P Voltage OUT2N to OUT2P Voltage OUT2N to OUT2P Symbol ICC VOUT1P VOUT1N VOUT2P VOUT2N VOUT1_1 VOUT1_2 VOUT1_3 VOUT2_1 VOUT2_2 VOUT2_3 VCONTROL1 = 2.5V VCONTROL1 = 5V VCONTROL1 = 0V VCONTROL2 = 2.5V VCONTROL2 = 5V VCONTROL2 = 0V VCONTROL1 = 2.5V VCONTROL2 = 2.5V Conditions Min. 1.5 4.5 4.5 4.5 4.5 -0.3 6.4 -7.4 -0.3 6.4 -7.4 Typ. 3.0 4.9 4.9 4.9 4.9 0 7.0 -7.0 0 7.0 -7.0 Max. 4.5 5.3 5.3 5.3 5.3 0.3 7.4 -6.4 0.3 7.4 -6.4 Unit mA V V V V V V V V V V 3 FAN7071 Power Darting Curve 2250 2000 1750 Power Dissipation PD(mW) 1500 1250 1000 750 500 250 0 0 25 50 Rja=60 C/W O 75 100 O 125 150 Ambient Temperature Ta ( C) Typical Application Circuit FAN7071 1 VCC 2 CONTROL1 3 CONTROL2 4 PGND1 5 OUT1P 6 OUT1N 7 PGND2 8 OUT2P 9 OUT2N 10 GND 12V 0~5V 0~5V Load Load Typical Output Voltages By Control Input Voltage Change 8.4V 8.4V Output Voltage 4.9V Output Voltage V6 V5 V9 V8 4.9V 1.4V 1.4V 0 2.5V 5V 0 2.5V 5V Control Input(V2) Control Input(V3) 4 Package #10 #1 26.50 0.20 1.043 0.008 1.55 0.10 0.061 0.004 0.50 -0.05 Mechanical Dimensions 26.90 MAX 1.059 +0.10 0.60 0.10 0.024 0.004 2.54 0.100 ( 1.40 0.10 0.055 0.004 2.29 0.20 0.090 0.008 5.91 0.30 0.233 0.012 +0.004 0.020 -0.002 1.82 ) 0.072 10-SIPHA R 8.40 0.20 0.331 0.008 1.60 0.20 0.063 0.008 16.00 0.20 0.630 0.008 21.09 MAX 0.830 3.60 0.20 0.142 0.008 1.20 0.20 0.047 0.008 3.20 0.20 0.126 0.008 FAN7071 5 FAN7071 Mechanical Dimensions (Continued) Package 10-SIPHD 6 FAN7071 Ordering Information Device FAN7071S FAN7071TS Package 10-SIPHA 10-SIPHD Operating Temp. -20C ~ +75C 7 FAN7071 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 4/3/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. |
Price & Availability of FAN7071 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |